Download

FRB BEARINGS INSTALLATION
Download
 



INSTALLATION

TRANSPORT-HANDLING
FRB Bearings slewing bearings are carefully packed in order to avoid any damage during transport. Transport and storage are to be carried out in horizontal position only; transport in other positions requires special methods. As with any mechnical precision part, the rings of bearings must be handled with care avoiding any shocks, particularly along with radial axis.Handling should be carried out with suitable equipment for the weight of the part, which is indicated on the identification tag.

DELIVERY-STORAGE
The packed rings have an anticorrosive surface protection allowing a 6-month-storage in a covered and temperate room. Asuitable protection must be applied for longer storage.

It is necessary to regrease after each 18-month period.

UNPACKING-PREPARATION

WHEN UNWRAPPING THE BEARING:

1) Take care not to cut the protective seals when removing the packing paper.
2) Cut this paper, preferalby on the external diameter, and not on the upper or lower faces. When degreasing the bearing;
3) Use a standard commercially available solvent. Chlorine containing solvents are prohibited.
4) Take care not to introduce any solvent under the seals or in the raceways.
5) Before fitting the grease nipples or junction pipes, remove the plastic caps or the Hcscrews from the greasing holes.


Previous   [Return Home] [Print] [Go Back]   Next

Categories

Contact Us

Hi, how can I help you?debbie