YRT Rotary Table Bearing

Category Description

YRT Rotary Table Bearing

YRT bearing consists of thrust/radial housing washer,a thrust/radial shaft,two Axial needle roller and cage assemblies and a group of radial cylindrical roller.Housing washer and shaft washer have equally sspaced fitting bolt.This kind of bearings have high axial load and radial load,and high tilting rigidity and high precision.This bearing can be used to the machine tool and other high precision machinery of the rotary table or sub-set,and also can be used for chuck,measuring instruments and test equipment and rotary table configuration.This bearing requires higher quality or the parts to match it.You must control screw tightening torque when install it.

Bearing features:
1.   High precision: precision at P4, P2.
2.   High rigidity: YRT series bearings are with preload.
3.   High load capacity: bearings can support axial load, radial load and tilting  load.
4.   High speed: YRTS series bearings can be applied in the high speed working condition

We have the series below, click to see each details:

1.YRT Rotary Bearing
YRT bearing consists of thrust/radial housing washer,a thrust/radial shaft,two Axial needle roller and cage assemblies and a group of radial cylindrical roller.Housing washer and shaft washer have equally sspaced fitting bolt.This kind of bearings have high axial load and radial load,and high tilting rigidity and high precision.

2.YRTS Rotary Bearing

Due to their high limiting speeds and very low, uniform frictional torque across the whole speed range, these bearings are particularly suitable for combination with torque motors.

3.YRTM Rotary Table Bearing

Axial and radial bearing YRTM with the angle measuring systemis based on the YRT bearing; it is mounted with angle measuring system on the YRT bearing, in order to accurately measure and adjust the angle of the bearing rotating and make sure the high rotation speeds.

4.ZKLDF Rotary Table Bearing

ZKLDF are low-friction, high accuracy for very high speeds, high axial and radial loads and high demands on tilting rigidity. These bearings are particularly suitable for precision applications involving combined loads.

Categories

Contact Us

Hi, how can I help you?debbie